Center Bundle heavy Armored Optical Fiber Cable(GYXTW53)

Introduction

The fibers are placed in a loose tube made of PBT.The tube is filled
with a water-resistant filling compound.The tube is wrapped with a layer
of PSP longitudinally.Between the PSP and the loose tube water-blocking
material is applied to keep the cable compact and wateright.
Two parallel steel wires are placed at the two sides of the steel tape.
over which a thin PE inner sheath is applied.
After the PSP is longitudinally applied over the inner sheath,
the cable is completed with a PE outer sheath.

G652D fiber information

Mode field diameter(1310nm):9.2μm±0.4μm
Mode field diameter((1550nm):10.4μm±0.8μm
Cladding diameter: 125μm±1.0μm
Coating diameter: 245μm±7μm
Cut off wavelength of cabled fiber:≤1260μm
Attenuation at 1310nm:≤0.35dB/km
Attenuation at 1550nm:≤0.21dB/km
Bending loss at 1550nm(100 turns,30mm radius):≤0.05dB
Dispersion in the range 1288 to 1339nm:≤3.5ps/(nm.km)
Dispersion at 1550nm:≤18ps/(nm.km)
Dispersion slope at zero dispersion wavelength:≤0.092ps/(nm2.km)

Order Information